Cubic SHT-5 Methane Sensor
The CU-1000 Cubic SHT-5 Infrared Methane Gas Sensor detects 0-5% levels of flammable hydrocarbon methane gases in ambient environments.
- Measures 0 to 5% methane
- Useful for safety and alarms
- Long-life infrared sensor
- Precise measurement and stable performance
- ATEX rated for combustible environments
- Serial UART and analog voltage outputs
- Life expectancy > 5 Years
The sensor can be reliable for the detection of refrigerants such as R32 as well as other hydrocarbons like propane. It can also be used for environmental monitoring, gas drainage, chemical, algae, petroleum, metallurgy, oil depots, liquefied gas stations, paint, gas transmission, and other combustible gas applications..
CU-1000 CH Sensor Infrared methane gas sensor only.
CU-1001 Sensor Development kit. CU-1000 Sensor on PCB with Serial UART to USB cable, makes it simple to read, graph or data log methane levels using our free GasLab® software.
- Measuring Gas: Methane
- Sensing Method: NDIR
- Measurement Ranges: 0-5%
- Measurement Resolution: 100ppm
- Rate of Measurement: 1 reading ~ 1 sec
- Response Time T90: < 25s
- Zero Drift: 1% measurement per month
- Sensitivity repeat-ability: 0~5%vol: 0.1% (68° F)
- Operating Temperature Range: -40° ~ 70°C
- Sensor Life Expectancy: > 5 years
- Dimensions: 0.79 x 0.75 in. (20x19mm)
- Power Requirements: 3.5-6VDC
- Output Analog Voltage: 0.4V-2VDC
- Serial UART Output: 9,600, 8,N,1
- Warm-up: 30s
- Output footprint: 5 pins
- 90 Days. See GasLab Terms and Conditions
Free Easy-to-use GasLab® Software
The Devkit uses GasLab® software for setup, calibration, data logging, and real-time data analysis via USB. GasLab® makes it easy to export data into a .CSV file that can be imported into any industry-standard software or spreadsheet. GasLab® runs on Windows XP or higher, and free to use with our products.
- Windows XP SP2 or newer
- Microsoft .Net 3.5 Runtime Libraries
Tube cap adapters easily convert 20mm standard gas sensors from diffusion to sampling sensors. Molded polymer. Tube cap adapters are not pre-installed. For accurate results you must mount the tube cap permanently.
Micro-Pump Kit includes all the tools you need to urilize the tube-cap adapters as part of a sampling sensor system.
Nafion tubing is a highly selective, semi-permeable membrane to water vapor. If gases inside Nafion tubing are wetter than gases surrounding the tubing, drying will occur. If the surrounding gases are wetter, humidification will occur.
Micro gas sampling pumps provide a constant flow of air across the sensor with a tube cap - perfect for bench-top testing of sensors for closed-loop sampling applications.